MAKE¬†multiple remotes functions Into a single remote!!¬†Duplicate any remotes!!¬†Super convenient!! Cars, sunroofs, garage doors, rolling gates, heating systems, wireless anti-theft devices, home automation…
Super Safety & Secured!! This duplicator¬†adopts one-to-one key copy technology¬†and the¬†password of each key is saved individually!! No possibility to mess up!!¬†
Make a copy of any key in a few seconds¬†through¬†simple steps¬†and be¬†prepared for any possible button breaks!!
¬†‚òÖ‚òÖ‚òÖ[DUPLICATION OF ANY REMOTES]
¬†Duplicate existing remote controllers¬†for cars, car sunroofs, garage doors, gate doors, heating systems, home automation e.g. lighting and etc.
‚òÖ‚òÖ‚òÖ[ABCD FOUR BUTTONS]
Super Convenient!! 1 remote = 4 remotes!! Respectively copy four different types of chips and¬†so operate four different types of facilities!! FOUR storage site for 4 different remotes!!¬†
Works for 315 / 433MHz fixed codes and learning codes; transmit distance is¬†50-100m¬†(open space)
¬†‚òÖ‚òÖ‚òÖ[Super Secured & Safe to use]
This duplicator¬†adopts one-to-one key copy technology¬†and the¬†password of each key is saved individually!! No possibility to mess up!! Password of each key is¬†saved individually and is reliable!!
‚òÖ‚òÖ‚òÖ[¬†PORTABLE HUMANIZED DESIGN]¬†
Handy key chain size attached to your car keys.¬†Button slide cover¬†to¬†protect buttons from accidental unplanned operation!!
TO CLEAR CODE:
- Press button A&B at the same time, in about 2 seconds the LED light will flash 3 times and then go out.
- Release button B at the same time, the button A continues to hold, don’t release.
- Press button B for 3 times, then you can see the LED light will flash rapidly and continuously (button A is still holding) which indicates that the code has been cleaned up.
- Release the button A and now you have successfully cleared the code.
- Take the original remote control in one hand and Clone Remote Control on the other. Keep the two remote controls as close as possible.
- Press the first keys of the two remote controls altogether and you should see the LED light will flash 2 times and then slowly flash 3 times.
- You have now successfully cloned that button now uses the same method to copy the rest of the keys.
- Product Material:¬†ABS
- Product Size:¬†55 x 30 x 15mm/2.17 x 1.18 x 0.59″
- Rated Voltage:¬†6V
- Rated Current:¬†12mA
- Product Weight:¬†25g
- Modulation Method:¬†ASK (amplitude modulation)
Wireless Distance:¬†50-100m (open)
- 1 X¬†Remote Control Duplicator (ALL REMOTE)